EDL Deep Flash Cable for xiaomi Phone Models Open Port 9008 for BL Locks Engineering

In order to be able to work with deep flash cable for Xiaomi it is necessary to put the phone in a deep flash mode. If a faulty handset can enter fastboot mode through the volume down key and power button combinations, the driver can be recognized normally. Deep flash cable will be needed for a faulty handset which is damaged deeply in the system and unable to properly identify the port.

• Millet engineering networks, Brush line depth, supports all millet BL lock Qualcomm cell phone! Forced into 9008 mode, the depth of Brush!
• Supports all Qualcomm phones millet locks BL, BL no lock or a non-Qualcomm chip phone does not support!
• There are currently sorting out the lock BL models are: millet 4S, 4i, 4C, millet 5, 3 red rice, red rice NOTE3
• Millet 4 because there is no BL lock, so you can not use this line, but there is a need for a friend, you can use the ZXW factory engineering board into the depth of the brush mode!
• Engineering line can save brick: This line is the line brush, brush machine for system software failure, if the mobile phone brick, recommended for font solution! How to protect data to unlock: Mobile phone to unlock the need to enter the REC mode, through the assistant to unlock, if the phone can not enter the REC mode, the use of the project line is no way!

How to use?

1. Download miflash platform and driver
2. Put the phone in fastboot mode
3. Take out the battery of the faulty handset
4. Connect the phone to computer with USB cable
5. Press the phone ON/OFF button.
6. When switching off your phone press cable switch button and hold it for about 8 seconds. Device manager will recognize the phone as port 9008, which means that deep flash mode is activated
7. Use MIFLASH original platform flash