YOUR SHOPPING CART IS EMPTY
Featured
Z3X Easy-Jtag Plus - Outstanding features:
- One click device repair
- Boot repair
- Data recovery
- eMMC firmware repair
- Partition management
- eMMC service operations
- SPI memory programming
Z3X Easy-Jtag Plus - Hardware features:
- Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
- Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
- Updated power management subsystem – full digital PWM with ADC control
- Added Micro-USB connector (if additional power required)
- Added VCC and VCCQ switch with overcurrent protection
- Updated USB device interface: USB 2.0 480 Mbps (high speed)
- Integrated ISP engine: Z3X high power pro engine (4 MB/s)
- ISP support 1 and 4 bit* connection
- Added eMMC 8-bit high-speed interface up to 42 MHz
- Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
- Integrated M-PHY* interface
- Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
- Integrated self-test core that excludes 90% faults in production
- Integrated CCID card reader for Z3X Software Use
Z3X Easy-Jtag Plus - Hardware benefits:
- Box to Host PC speed increased up to 40 MB/sec
- JTAG Interface speed increased by 20%
- eMMC 1 Bit ISP Speed increased up to 4 MB/sec
- eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
- eMMC 4 Bit Speed up to 18 MB/sec
- eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
- Compatible with 99% host PC systems and OS
- Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
- Compatibility with most of the popular eMMC sockets (with supplied adapters)
- Plug and Play for Windows OS 8/ 8.1/10
- Full support for Windows XP
eMMC Socket - Features:
- Made from high quality materials
- Over 10K cycles of lifetime performance
- Support for a wide range of eMMC ICs
- High-speed up to 40 MB/sec through 8-bit bus
- EMI resistant design, low noise components
- Integrated power logic (no need for additional power source)
- Surge protection - smart fuse driven (0.5A threshold)
Z3X Easy-Jtag Plus Full Set - Package Content:
- Easy-JTAG Plus Box Hardware
- Z3X preactivated card with EasyJTAG PLUS Activation
- Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
- USB A-B cable
- Adapter set - 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
- 1 year guaranteed free support access
* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.
Accta 301A – dual-channel hot air soldering/desoldering station. Apart from the hot air gun, the package includes a soldering iron, hor air gun and soldering iron holders, a soldering iron tip and hot air nozzles.
Features
- Ultra-compact device.
- Microprocessor control system.
- Real-time temperature display.
- Allows temperature monitoring when the tip touches with the surface.
- Temperature parameters control using analog adjusting potentiometers.
- Hot air gun overheating protection.
- Soldering iron temperature accuracy ±5 °C.
- Soldering iron linear temperature characteristic.
- Soldering iron heat-up time up to 12 seconds.
- Hot air gun auto switch-off.
- Soldering iron compatibility with Hakko 900M standard replacement soldering tips.
- FCC certified.
- The power cord may be disconnected and replaced. The connection type is IEC cord (C13/C14).
- CE certified.
Technical Specifications
| Power Consumption | 450 W |
| Soldering Iron Power | 50 W |
| Hot Air Gun Power | 350 W |
| Soldering Iron Temperature Range | 80 – 480 °C |
| Hot Air Gun Temperature Range | 80 – 480 °C |
| Soldering Iron Heating Element | ceramic |
| Hot Air Gun Heating Element | metal heating core |
| Air Pump Type | turbine blower |
| Air Capacity | 120 l/min |
| Power Input | 110 V, 60 Hz |
| Main Unit & Hot Air Gun Holder Size | 190 × 194 × 103 mm |
| Main Unit Size (without holder) | 128 × 194 × 100 mm |
| Weight | 2.3 kg |
The default plug type is Type A. In case you need a different plug please contact our manager.
Video
Package Contents
- Accta 301A Hot Air Rework Station – 1 pc.
- Hot Air Gun Holder – 1 pc.
- Hot Air Nozzles – 3 pcs.
- Soldering Iron – 1 pc.
- AOYUE T-I Soldering Tip – 1 pc.
- Soldering Iron Holder – 1 pc.
- Tip Cleaning Sponge – 1 pc.
- User's Manual – 1 pc.
Compatible Soldering Tips
| Conical Soldering Tips | ||
|---|---|---|
 AOYUE T-0.5C |
 AOYUE T-0.8C |
 AOYUE T-B |
 AOYUE T-I |
 AOYUE T-LB |
 AOYUE T-S4 |
 AOYUE T-S8 |
 AOYUE T-SB |
 AOYUE T-SI |
| Bevel Type Soldering Tips | ||
 AOYUE T-1C |
 AOYUE T-1.5CF |
 AOYUE T-1.5CM |
 AOYUE T-2C |
 AOYUE T-2CF |
 AOYUE T-2CM |
 AOYUE T-3C |
 AOYUE T-3CF |
 AOYUE T-3CM |
 AOYUE T-4C |
 AOYUE T-4CF |
 AOYUE T-4CM |
 AOYUE T-S6 |
 AOYUE T-S7 |
|
| Chisel Type Soldering Tips | ||
 AOYUE T-0.8D |
 AOYUE T-1.2D |
 AOYUE T-1.2LD |
 AOYUE T-1.6D |
 AOYUE T-2LD |
 AOYUE T-2.4D |
 AOYUE T-3.2D |
 AOYUE T-3.2LD |
 AOYUE T-S3 |
 AOYUE T-S9 |
||
| Bent Type Soldering Tips | ||
 AOYUE T-0.2RB |
 AOYUE T-1.8H |
 AOYUE T-H |
| Knife Type Soldering Tips | ||
 AOYUE T-K |
||
| Soldering Tips for SMD | ||
 AOYUE T-R |
 AOYUE T-RT |
|
Extra Images
