Z3X Easy-Jtag Plus Full Set

Z3X Easy-Jtag Plus - Outstanding features:

• One click device repair
• Boot repair
• Data recovery
• eMMC firmware repair
• Partition management
• eMMC service operations
• SPI memory programming

Z3X Easy-Jtag Plus - Hardware features:

• Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
• Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
• Updated power management subsystem – full digital PWM with ADC control
• Added Micro-USB connector (if additional power required)
• Added VCC and VCCQ switch with overcurrent protection
• Updated USB device interface: USB 2.0 480 Mbps (high speed)
• Integrated ISP engine: Z3X high power pro engine (4 MB/s)
• ISP support 1 and 4 bit* connection
• Added eMMC 8-bit high-speed interface up to 42 MHz
• Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
• Integrated M-PHY* interface
• Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
• Integrated self-test core that excludes 90% faults in production
• Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus - Hardware benefits:

• Box to Host PC speed increased up to 40 MB/sec
• JTAG Interface speed increased by 20%
• eMMC 1 Bit ISP Speed increased up to 4 MB/sec
• eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
• eMMC 4 Bit Speed up to 18 MB/sec
• eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
• Compatible with 99% host PC systems and OS
• Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
• Compatibility with most of the popular eMMC sockets (with supplied adapters)
• Plug and Play for Windows OS 8/ 8.1/10
• Full support for Windows XP

eMMC Socket - Features:

• Made from high quality materials
• Over 10K cycles of lifetime performance
• Support for a wide range of eMMC ICs
• High-speed up to 40 MB/sec through 8-bit bus
• EMI resistant design, low noise components
• Integrated power logic (no need for additional power source)
• Surge protection - smart fuse driven (0.5A threshold)

Z3X Easy-Jtag Plus Full Set - Package Content:

• Easy-JTAG Plus Box Hardware
• Z3X preactivated card with EasyJTAG PLUS Activation
• Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
• USB A-B cable
• Adapter set - 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
• 1 year guaranteed free support access

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions.